login   |    register

Scale Modeling Sponsors

See Your Ad Here!

Air Campaigns
Want to start or join a group build? This is where to start.
OFFICIAL: 2nd Gen. Jet Fighters Campaign
RadekZ
_VISITCOMMUNITY
Warszawa, Poland
Joined: March 12, 2013
KitMaker: 57 posts
AeroScale: 24 posts
Posted: Saturday, December 09, 2017 - 11:52 AM GMT+7
Hi,

F-102 is finally on it's wheels.

I've applied decals and followed with slight overall wash made of Tamiya paneliner brown and homemade wash from VanDyke brown.

I have also started final assembly that ended up with need to repaint some parts I've damaged with glue or by ... mistaking cup with mineral spirit for cup with Tamiya thinner ... oops.

Nevertheless I'm on final now with only few parts left to glue on.

Here's the state at the moment:




Cheers,
Radek
JYoder
_VISITCOMMUNITY
Tennessee, United States
Joined: December 07, 2017
KitMaker: 2 posts
AeroScale: 1 posts
Posted: Thursday, December 07, 2017 - 08:45 AM GMT+7
Hello, just entered this campaign. Will have a go at this kit. Nostalgia from my past.
md72
#439
_VISITCOMMUNITY
Washington, United States
Joined: November 05, 2005
KitMaker: 3,743 posts
AeroScale: 2,481 posts
Posted: Monday, November 20, 2017 - 09:41 AM GMT+7
Thanks, I didn't notice at the time, but I didn't get the MLG even so it lists strongly to port....
JClapp
#259
_VISITCOMMUNITY
Massachusetts, United States
Joined: October 23, 2011
KitMaker: 2,126 posts
AeroScale: 1,626 posts
Posted: Monday, November 20, 2017 - 09:31 AM GMT+7

Quoted Text

Stick a fork in this one. I'm calling it done. Some day I might want to go back and weather it. But for this campaign it's done.




Is there a campaign gallery I should load these to?



knowing what you had to work with I'd say that came out splendid!
RadekZ
_VISITCOMMUNITY
Warszawa, Poland
Joined: March 12, 2013
KitMaker: 57 posts
AeroScale: 24 posts
Posted: Monday, November 20, 2017 - 09:20 AM GMT+7
Hi guys,
after a while I've managed to get some progress on F-102.

It's now all painted in 3-tonal camo.

Paints used:

Gunze H315 - Gray FS16440
Gunze H310 - Brown FS 30219
Gunze H309 - Green FS 34079
Gunze H303 - Green FS 34102

In addition White & Black from Tamiya to make some tonal variation.

Still need to make some retouches as the coverage isn't good in some places (you can see primer here and there).

Here are some pics:





Next I will correct remaining flaws in camo and then varnish seal for decals

CHeers,
Radek
2002hummer
#257
_VISITCOMMUNITY
Ontario, Canada
Joined: October 11, 2011
KitMaker: 596 posts
AeroScale: 331 posts
Posted: Tuesday, October 17, 2017 - 04:06 PM GMT+7
Bob R(Bigrip74) Great looking build. You are braver than me to clean all your a/b's at once. Question, Where did you get the mounting system for your camera?.
goodn8
_VISITCOMMUNITY
Berlin, Germany
Joined: October 12, 2008
KitMaker: 488 posts
AeroScale: 474 posts
Posted: Tuesday, October 17, 2017 - 06:30 AM GMT+7
Still great work on your kits, guys!

Meanwhile I managed to go a step ahead with my scratched parts...
More details here.









Thomas
RadekZ
_VISITCOMMUNITY
Warszawa, Poland
Joined: March 12, 2013
KitMaker: 57 posts
AeroScale: 24 posts
Posted: Wednesday, October 04, 2017 - 08:24 AM GMT+7
Hi guys,
great to see you guys moving forward with your builds! All those are state-of-art.
As for mine F-102 I hope I will stop making some stupid mistakes at some point of time...
The kit is a real charm and puts together almost like Lego blocks, but I wouldn't be me if I didn't screw something up.
So I made it up to joining fuselage with wings section (which includes undercarriage section and bomb bay). All joints were seamless, but after I glued it I probably bumped it too hard on desk before glue settled enough. In result the rear joint displaced a fraction of milimeter making a huge bump between parts... I didn't notice it until next day when it was already too late for easy fix.
I softened the gap with some melted plastic and sanded it like madman . Doesnt' look bad, but it will be visible for sure after finish...

Well, enough of this TLDR stuff
Two pics of current state:


On the last pic you can see sanded bump as darker plastic spot on fuselage just where the wings end.

Cheers,
Radek
Bigrip74
_VISITCOMMUNITY
Texas, United States
Joined: February 22, 2008
KitMaker: 4,331 posts
AeroScale: 2,188 posts
Posted: Saturday, September 30, 2017 - 01:55 PM GMT+7
Tom, really nice job on the office.

Bob
doubtingthomas
_VISITCOMMUNITY
Wisconsin, United States
Joined: March 17, 2009
KitMaker: 156 posts
AeroScale: 153 posts
Posted: Saturday, September 30, 2017 - 03:10 AM GMT+7
Wow - There is some great modeling going on in this thread.

I'm a late starter, but have begun the Trumpeter 1/32 MiG-21F-13. Actually, this was started back on August 11 (I think), but am just now getting to post pictures of progress up to date.


I'm using a Pavla resin ejection seat, Kuovailainen (sp?) colored PE, and adding some plumbing details to the wheel wells. I'm not doing anything to the engine, as that - and all the other Trumpeter open panels...grrrr....- will be closed.


I'm not sure what color and markings I'm going to do. I have conflicting thoughts on Finnish Ilamvoimat (a) I would need to scratch some decals, and b) I don't see any pictures of service aircraft with weapons loads and I WANT WEAPONS), Vietnam (not finding much in the way of pictures for this either), or classic Soviet.

Enjoy!
-Tom
Bigrip74
_VISITCOMMUNITY
Texas, United States
Joined: February 22, 2008
KitMaker: 4,331 posts
AeroScale: 2,188 posts
Posted: Friday, September 29, 2017 - 05:02 PM GMT+7
I normally use 2 different a/b for painting out of the 12 I own. To my shame only 2 of those are beyond repair, I spent most of the day taking all apart and first soaking them in Lysol all purpose cleaner to remove the caked paint then alcohol to remove any residue. All of the a/b have needed this for some time now and my fear of taking apart an a/b had overcame me with the thought of all of those tiny parts (which Ive either lost or installed incorrectly in the past). So I took the plunge and took each apart completely (one at a time)and actually gave them all a tune up. When I tested each on the compressor they sang like a kitten. I guess I should have rid myself of that fear of destroying much earlier.

While soaking I set up the photo booth I had received a while back. The F100 is ready for the 3rd color to be applied.




oraora
_VISITCOMMUNITY
Kuching, Malaysia
Joined: June 19, 2002
KitMaker: 216 posts
AeroScale: 128 posts
Posted: Tuesday, September 26, 2017 - 05:30 PM GMT+7
Thank you, bob
Bigrip74
_VISITCOMMUNITY
Texas, United States
Joined: February 22, 2008
KitMaker: 4,331 posts
AeroScale: 2,188 posts
Posted: Tuesday, September 26, 2017 - 03:02 PM GMT+7
Ken, welcome to the campaign and looks like you have a good build there.

Bob
oraora
_VISITCOMMUNITY
Kuching, Malaysia
Joined: June 19, 2002
KitMaker: 216 posts
AeroScale: 128 posts
Posted: Tuesday, September 26, 2017 - 02:14 PM GMT+7
Hi, i just joined this campaign. I am going to build an old hasegawa harrier gr.1, will be using aftermarket decals as the kit decals looks way beyond help.
Bigrip74
_VISITCOMMUNITY
Texas, United States
Joined: February 22, 2008
KitMaker: 4,331 posts
AeroScale: 2,188 posts
Posted: Tuesday, September 26, 2017 - 02:14 PM GMT+7
Thomas, thanks for the condolences. Its all my fault for not taking the a/b apart the last time it was used.

Well! Ive finally started the paint process on the F100. The under surfaces are gray and I have penciled in the top for the 3 colors for the SEA camo. You may not be able to see, but its there.
goodn8
_VISITCOMMUNITY
Berlin, Germany
Joined: October 12, 2008
KitMaker: 488 posts
AeroScale: 474 posts
Posted: Monday, September 25, 2017 - 05:48 AM GMT+7
Great work Radek, nice detailing - move on!

Bob, sorry for your mess wit the AB - those incidents can really s*** . Glad that you overcome the issue and did 5!! paint jobs - cudos!

Following up all your shown builds - great work on all!
Thomas
Bigrip74
_VISITCOMMUNITY
Texas, United States
Joined: February 22, 2008
KitMaker: 4,331 posts
AeroScale: 2,188 posts
Posted: Sunday, September 24, 2017 - 12:12 PM GMT+7
I let my airbrush set for 30 days and WOW! It bit me when I tried to use it this morning for (6) airplanes that I thought I would paint. Not only did the airbrush fight, the pump and the quick release attachments were all angry.
Cleaned the airbrush again and found some rust on the needle. After a couple of hours I removed the quick release adapters and reinstalled Teflon tape to the fittings on the pump after a leak was detected.
Was finally able to paint (5) a/c in phases such as upper or lower surfaces.
I will use the photo cube for the first time tomorrow to post photos.
md72
#439
_VISITCOMMUNITY
Washington, United States
Joined: November 05, 2005
KitMaker: 3,743 posts
AeroScale: 2,481 posts
Posted: Sunday, September 24, 2017 - 04:37 AM GMT+7
Hey, I finally found the campaign gallery 2nd Generation Jet Fighters
And got my pics posted. Thanks, it was a great campaign, and I actually FINISHED one!!!!
pkrasna
_VISITCOMMUNITY
Slovenia
Joined: April 20, 2013
KitMaker: 10 posts
AeroScale: 10 posts
Posted: Friday, September 22, 2017 - 10:51 AM GMT+7
Thank you RadekZ, Bigrip74 and goodn8 for your kind words. Great work from you also. Glad to be a part of this GB.

Soo some progres... whell bay covers were made...


and front leg compartment detailed up.






and at last the nose cone needed to be shaped from skratch.


that's all.
Removed by original poster on 09/22/17 - 15:37:42 (GMT).
Bigrip74
_VISITCOMMUNITY
Texas, United States
Joined: February 22, 2008
KitMaker: 4,331 posts
AeroScale: 2,188 posts
Posted: Friday, September 22, 2017 - 06:46 AM GMT+7

Quoted Text

Bob-Don't feel too bad, mine is still in the box...

Take care,
Don "Lakota"



The XF19 arrived today, so I will be able to continue with an SEAC camo on my F100.

Bob
Lakota
#123
_VISITCOMMUNITY
New Mexico, United States
Joined: November 17, 2008
KitMaker: 718 posts
AeroScale: 188 posts
Posted: Thursday, September 21, 2017 - 01:34 PM GMT+7
Bob-Don't feel too bad, mine is still in the box...

Take care,
Don "Lakota"
Bigrip74
_VISITCOMMUNITY
Texas, United States
Joined: February 22, 2008
KitMaker: 4,331 posts
AeroScale: 2,188 posts
Posted: Monday, September 18, 2017 - 12:12 PM GMT+7
While everyone has been producing really outstanding builds, Ive only manged to prime my F100.
md72
#439
_VISITCOMMUNITY
Washington, United States
Joined: November 05, 2005
KitMaker: 3,743 posts
AeroScale: 2,481 posts
Posted: Saturday, September 16, 2017 - 01:23 PM GMT+7
Stick a fork in this one. I'm calling it done. Some day I might want to go back and weather it. But for this campaign it's done.




Is there a campaign gallery I should load these to?
goodn8
_VISITCOMMUNITY
Berlin, Germany
Joined: October 12, 2008
KitMaker: 488 posts
AeroScale: 474 posts
Posted: Saturday, September 16, 2017 - 04:54 AM GMT+7
Moving slowly on with the pit and modified at least the seat.
Done some more pics shown here.





Thomas